Measuring Form

Customer name:
Address:
City:	ST:	Zip:	Phone: ( )
Store name/#		Salesperson:
Address:
City:	ST:	Zip:	Phone: ( )

LIST OF OPTIONS:
Type of skin:	Height of top (inches):	# Of stitch rows:
Color of top:	Color of stitching:	Stitch pattern:
Special inlay:

	NORMAL SHOE SIZE: _____
	LENGTH: _____
	WIDTH: _____

Measuring you feet for a custom fit boot

You will need two clean sheets of paper that are larger than your foot to draw an outline around it. Outlining should be done while standing, with socks on and with weight evenly on both feet. Draw each outline carefully, holding pencil STRAIGHT UP AND DOWN AT ALL TIMES as illustrated below. Please use soft lead pencil so markings will be black and clear. Do not use ball point pens.

STEP #1 Draw a sketch of each foot one at a time, holding the pencil straight up and down. Start at the heel and go around to the toe to the left and then to the right.

HEEL LEFT: _____

HEEL RIGHT: _____

STEP #2 Measure the heel by wrapping the tape measure around the heel using the centimeter side, bring the tape to the front center approximately one inch down from the bend of the foot.

INSTEP LEFT: _____

INSTEP RIGHT: _____

STEP #3 Wrap the tape around the instep of the foot (the highest part of the instep is the best spot). While the tape is around the foot make a mark on the paper where the tape is located on the foot.

BALL LEFT: _____

BALL RIGHT: _____

STEP #4 Wrap the tape around the ball of the foot, pick the widest two points, also make marks on the paper where the tape is setting on the foot.

CALF LEFT: _____

CALF RIGHT: _____

Measuring you feet for a custom fit boot

STEP #1 Draw a sketch of each foot one at a time, holding the pencil straight up and down. Start at the heel and go around to the toe to the left and then to the right.

STEP #2 Measure the heel by wrapping the tape measure around the heel using the centimeter side, bring the tape to the front center approximately one inch down from the bend of the foot.

STEP #3 Wrap the tape around the instep of the foot (the highest part of the instep is the best spot). While the tape is around the foot make a mark on the paper where the tape is located on the foot.

STEP #4 Wrap the tape around the ball of the foot, pick the widest two points, also make marks on the paper where the tape is setting on the foot.

STEP #5 Measure the calf at the widest spot.

Copyright © 2004 Boot Hill Custom Boots